Product ID:C-1452 PRIMER FOR MIL-P-20689D
MSDS Date:01/25/1991
FSC:8030
NIIN:01-041-1604
Kit Part:Y
MSDS Number: BRFRQ

PYRAMID PLASTICS, INC; TOBLER DIVISION

220 WEST 5 STREET
HOPE, AR 71801
US

Emergency Phone: 800-727-2535 EXT. 2586

Info Phone: 501-777-3251

Cage: 59460

STEVEN INDUSTRIES

8 BAYONNE, NJ 07002-3417 US

Telephone: 201-437-6501

Cage: 33150

NAPHTHA VM&P

CAS: 8030-30-6

RTECS: DE3030000

Fraction By Weight: 5-10%

OSHA PEL 500 PPM

ACGIH TLV: 500 PPM

METHYL EHTYL KETONE (MEK) (SARA III)

CAS: 110-80-5

RTECS: KK8050000

Fraction By Weight: 40-50%

OSHA PEL 200 PPM

ACGIH TLV: 200 PPM;STEL 300 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 10-20%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

2-ETHOXY ETHANOL (SARA III)

CAS: 110-80-5

RTECS: KK8050000

Fraction By Weight: 5-10%

OSHA PEL 200 PPM

ACGIH TLV: 5 PPM (SKIN)

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:OVEREXPOSURE IN LABORATORY ANIMALS HAS
APPARENTLY SHOWN THE FOLLOWING EFFECTS: LIVER ABNORMALITIES, BRAIN,
LUNG, KIDNEY DAMAGE. ADVERSE REPRODUCTION AND DEVELOPMENT EFFECTS.
Effects of Overexposure:EYE AND LUNG IRRITATION POSSIBLE. SKIN
IRRITATION.
Medical Cond Aggravated by Exposure:SKIN DISORDERS. EYE AND LUNG
DISORDERS POSSIBLE.

First Aid:EYE: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. SKIN: WASH
WITH SOAP AND WATER. INHALATION: REMOVE TO FRESH AIR. INGESTION: DO
NOT INDUCE VOMITING. GET MEDICAL HELP.

Flash Point Method:TCC
Flash Point:26.0F,-3.3C
Lower Limits:2
Upper Limits:12
Extinguishing Media:CO2, DRY CHEMICAL, ALCOHOL FOAM
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
PROTECTIVE CLOTHING
Unusual Fire/Explosion Hazard:MATERIAL IS HIGHLY VOLATILE. VAPORS ARE
HEAVIER THAN AIR AND MAY TRAVEL TO IGNITION SOURCE AND FLASH BACK.

Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. DIKE SPILL
AREA WITH SOIL OR OTHER INERT MATERIAL. SOAK UP WITH ABSORBENT
MATERIAL AND STORE IN CLOSED CONTAINERS.

Handling and Storage Precautions:STORE IN COOL, DRY AREA AWAY FROM HEAT
OR IGNITION SOURCE.

Respiratory Protection:WEAR NIOSH APPROVED RESPIRATOR.
Ventilation:LOCAL EXHAUST/MECHANICAL (GENERAL): REQUIRED, SUFFICIENT TO
KEEP EXPOSURE BELOW TLV'S.
Protective Gloves:POLYMER RESISTENT
Eye Protection:SPLASH GOGGLES
Other Protective Equipment:IMPERVIOUS CLOTHING AND BOOTS.
Work Hygienic Practices:NORMAL CLEANLINESS SHOULD BE OBSERVED.
Supplemental Safety and Health

Boiling Pt:B.P. Text:152F,67C
Vapor Density:>1
Spec Gravity:0.91
Evaporation Rate & Reference:2 (BU AC=1)
Appearance and Odor:WHITE LIQUID. KETONE ODOR

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:EXCESSIVE HEAT AND IGNITION SOURCE
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE, SMOKE
IN FIRE

Waste Disposal Methods:INCINERATE OR LANDFILL IN ACCORDANCE WITH EPA,
STATE, AND LOCAL REGULATIONS

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.